Posts

Super Antenna MP1 basic without mount

Super Antenna MP1 basic without mount

  • THIS IS: Super Antenna MP1 antenna (without mount, without SWR Ruler).
  • A limited number of this classic model Super Antenna is available. This version may be discontinued in 2016 and replaced by a new version.
  • A new upgraded version is available, called the “Super Antenna MP1B All Band Ham Radio HF Portable MP1 Antenna with SWR Ruler”.
  • Amazon link to the new 2016 upgrade product: http://www.amazon.com/dp/B0190E06HS

Super Antenna MP1 SuperStick (without mount). Super Antenna® is a Registered Trademark of Super Antenna Systems Corporation, USA.

List Price: $ 119.95

Price: [wpramaprice asin=”B00KU1VMFG”]

[wpramareviews asin=”B00KU1VMFG”]

Anderson Power 1470G3 Chassis Mount for 4 Powerpoles Sets (8 Conductors) CM-8

Anderson Power 1470G3 Chassis Mount for 4 Powerpoles Sets (8 Conductors) CM-8

Ideal for mounting Powerpoles on existing cabinets & panels. Kit includes (1) CM-8 Housing, 4 Red Powerpoles, 4 Black Powerpoles, 8 30 Amp Contacts, and 2 Retaining Pins. Knock out dimensions. Width 1.88in. 47.75mm Length 2.13in. 54.10mm

List Price: $ 13.99

Price: [wpramaprice asin=”B00IHOC8QA”]

[wpramareviews asin=”B00IHOC8QA”]

Related Ham Shack Products

Aweek® Car Antenna Mount Stainless Steel Car Clip Mount Trunk Lid Hatchback Mount Bracket RB-400 RB400 for Mobile vehicle Car Radio Car Two Way Radio Radio Antenna

Aweek® Car Antenna Mount Stainless Steel Car Clip Mount Trunk Lid Hatchback Mount Bracket RB-400 RB400 for Mobile vehicle Car Radio Car Two Way Radio Radio Antenna

  • Rubber mounting pad protects mounting surface
  • 2-axis adjustment gives flexibility in mounting location, i.e. trunk lid, hatchback, vertical door, etc.
  • Recommended for large VHF/UHF and medium size HF antennas
  • Click “Aweek” above, get related or more interesting products

Features:

1. No holes / drilling required

2. Rubber mounting pad protects mounting surface

3. Four set-screws insure mount strength for larger antennas

4. 2-axis adjustable

5. Color: Black

6. Weight: 280g

Package Includes:

1 x Black Trunk lid, hatchback mount bracket

1 x Protection plate

4 x screws (short)

Other necessary tool kit


Details:
If you want to konw better about this product, these website will help you:

http://ww

List Price: $ 8.99

Price: [wpramaprice asin=”B00KMTIJD4″]

[wpramareviews asin=”B00KMTIJD4″]

Find More HF Antenna Products

NMO Trunk Lip Mount for Cellular Phone Antennas with BNC male connector | No Holes Cell Antenna Mounting Bracket with Cable and Connector

NMO Trunk Lip Mount for Cellular Phone Antennas with BNC male connector | No Holes Cell Antenna Mounting Bracket with Cable and Connector

  • Chrome steel trunk lip antenna mount. For use with the standard base antenna that screws onto the mount. Includes 14′ RG58/U with installed connector.
  • Trunk-lip / door edge mount for permanent mounting of antennas without drilling a hole in your vehicle
  • Designed to attach on the lip of a trunk lid, panel edge, door, or other similar surface
  • Complete with coax cable and BNC male connector for radios / Also see “NMO Trunk Lip Mount for Cellular Phone Antennas with FME female Cable””
  • Built to withstand high speeds, these antennas are ideal for standard or small antennas where you do not want to drill a hole in your vehicle.radar arches and T-tops on speedboats, yachts and commercial vessels.

Allows mounting of a standard NMO base antenna to trunk lids, doors, and windows. Secure mount not requiring holes or permanent alteration of your vehicle.

List Price: $ 29.29

Price: [wpramaprice asin=”B00HUAJPQS”]

[wpramareviews asin=”B00HUAJPQS”]

Comet HD-5M Heavy Duty RS-840 Lip Mount w/ Coax Attached

Comet HD-5M Heavy Duty RS-840 Lip Mount w/ Coax Attached

  • Heavy-duty lip mount, up to 80″ antenna.
  • Mount adjusts in 3 planes.
  • Footprint: 3.75″ x 1.1″
  • Great with larger Comet antennas, such as UHV-4 and UHV-6, as well as the Yaesu ATAS-120.
  • Max Power: HF: 200W SSB | VHF: 75W FM | UHF: 50W FM

The HD-5M model is the combination of the RS-840 bracket and CK-3M5 deluxe coax cable assembly. Heavy-duty lip mount, up to 80″ antenna. Universal adjustable lip mount, 16′ 6″ deluxe cable assembly with SO-239/PL-259 connectors. Quality appearance and low loss coax cable assembly. Installs easily in only minutes to virtually any lip on a vehicle. Trunk lid, truck rear doors, SUV and van rear doors, hood lip, etc… Does not damage expensive and/or leased vehicles. A lateral support tab is part o

List Price: $ 82.99

Price: [wpramaprice asin=”B00HVKDAO0″]

[wpramareviews asin=”B00HVKDAO0″]

Find More ATAS-120 Products

Aweek® 5M Coaxial Cable PL-259 SO-239 Antenna Extension Cable CB Antenna Cable + Mini Black Car Antenna Mount Mobile Radio Antenn CB Radio Antenna For CB Radio/ Mobile Radio Mobile Two Way Radio/ Car Radio Kenwood ICOM Mobile Radio

Aweek® 5M Coaxial Cable PL-259 SO-239 Antenna Extension Cable CB Antenna Cable + Mini Black Car Antenna Mount Mobile Radio Antenn CB Radio Antenna For CB Radio/ Mobile Radio Mobile Two Way Radio/ Car Radio Kenwood ICOM Mobile Radio

  • This is a Coaxial cable for Mobile Radios + Deluxe heavy duty trunk lid/ hatchback mount
  • It will help your antenna to boost the signal of your radio significantly
  • Compatible with MOTOROLA YAESU ICOM KENWOOD Anytone mobile radio antenna which with SO239 interface
  • 2-axis adjustment gives flexibility in mounting location, i.e. trunk lid, hatchback, vertical door, etc.
  • Recommended for large VHF/UHF and medium size HF antennas, including the YAESU ATAS-100/120, Tarheel Little Tarheel II

Mobile Anteaan Mount:

1. No holes / drilling required

2. Rubber mounting pad protects mounting surface

3. Four set-screws insure mount strength for larger antennas

4. 2-axis adjustable

5. Color: Black

6. Weight: 280g

Mobile Antenna Cable:

1.Connector socket to antenna: SO239

2.Connector to Radio: PL259

3. Cable length: 5 meters

Related Products:

B00ME9QIM4 B00MEA18QO B00KMTIJD4 B00LGNKLXG B00K

List Price: $ 34.00

Price: [wpramaprice asin=”B00RBDMDE0″]

[wpramareviews asin=”B00RBDMDE0″]

Stainless Steel Extra Heavy Duty 3/8-24 Stud Mount for Ham & CB Radio Antennas

Stainless Steel Extra Heavy Duty 3/8-24 Stud Mount for Ham & CB Radio Antennas

  • * Super Strong Pure Stainless Steel Oversize Mounting Stud
  • * Fits All antennas using the regular 3/8-24 bolt-in thread.
  • * Accepts any Optional cable with PL-259 Connector
  • * Wrench Key included for tightening, Heaveiest Duty stud mount.
  • * Install in most mount/brackets, or flat surface hole.

Stainless Steel Super heavy duty antenna stud. 3/8-24 , So-239 input for cable.

List Price: $ 6.95

Price: [wpramaprice asin=”B0049B769O”]

[wpramareviews asin=”B0049B769O”]

Heil Sound PL-T2 Microphone Boom & FL-2 Flange Mount!

Here is the Heil PL-2T Pro Topless Mic Boom and Heil FL-2 Flange Mount from Heil Sound purchased from Ham Radio Outlet. These products were packed and delive…

Hosts: Bob Heil (K9EID), Gordon West (WB6NOA), and George Thomas (W5JDX) Wayne (W6IRD) and Sharon (K6IRD) Spring show off their shack and workshop, manufactu…
Video Rating: 5 / 5

DUAL BAND MAGNETIC MOUNT ANTENNA REVIEW-TRAM 1185(144-148mhz/435-450Mhz

An unbelievable Dual band Magnetic Mount Antenna, built like a tank for under ! Large diameter magnet, not the “newer” quarter size ones that get knocked …

I have found publications in old Radio Amateur magazine regarding long wire antenna and it’s benefits from my understanding conclusion was as follows : In th…
Video Rating: 5 / 5

Firestik LG4M2-B 4 ft. Side Mount Antenna with Ngp Kit -Black

Firestik LG4M2-B 4 ft. Side Mount Antenna with Ngp Kit -Black

  • And don’t forget … ALL antennas, regardless of style or manufacturer, MUST be tuned after installation on the vehicle. Transmitting antennas are not “plug-n-play” devices

PURPOSE: The LGX-M2 (where X = antenna length in feet) series, ‘No ground plane” (NGP) CB antenna kits were specifically designed to solve the problems associated with the lack of ground plane (counterpoise). This normally occurs on vehicles constructed of plastic, fiberglass, wood or aluminum. This includes, but is not limited to, motorhomes, boats, automobiles and 18-wheeler trucks. Ground plane problems typically show up in the form of high standing wave ratio (SWR) and poor performance. The

List Price: $ 51.27

Price: [wpramaprice asin=”B000X3C8T0″]

[wpramareviews asin=”B000X3C8T0″]

Related Standing Wave Ratio Products

TRUCKSPEC Side Body Mount For 3/8-24 CB & Ham Radio Antennas

  • TRUCKSPEC Side Body Antenna Mount with Lug Connector input TS-102B
  • Fits Antennas with 3/8-24 Base Thread.
  • Optional Coax cable with lug connectors required.

TruckSpec Side Body Antenna Mount With Lug Connector – TruckSpec TS-102B.

List Price: $ 11.97

Price: [wpramaprice asin=”B001JSYDKU”]

[wpramareviews asin=”B001JSYDKU”]

Check out these ARRL images:

Mount Mitchell

Image by digilink

Roan Mountain

Image by digilink
Some of the beautiful nature you’ll find atop Roan Mountain

How to install a Breedlove Mount stake pocket bracket for cb or ham radio antenna mount on your pick up truck. A solid brass EZ over antenna mount is also shown.
Video Rating: 5 / 5

Astatic Heavy Duty Antenna Lip Edge Antenna Mount – Angle Adjustable w/ Cable assembly

  • Multi Adjustable any direction, Fits any Angle lip / Metal Edge!
  • For Trunks, side hatches, hoods, doors, & other metal lip edges.
  • Complete wirh 16.5ft cable assembly w/PL-259 on Radio end. No Drilling.
  • For Antennas w/ 3-8/24 thread.
  • Great For HF Antennas, CB & Ham Radio antennas.

Heavy Duty Lip Edge Mount For 3-8/24 Thread Ham Amateur & CB Antennas!
Can Bet set for Antenna in vertical position regardless of installed lip angle.
Complete wirh 16.5ft cable assembly & PL-259 connector on radio end of cable.

List Price: $ 49.98

Price: [wpramaprice asin=”B0041WPXKA”]

[wpramareviews asin=”B0041WPXKA”]

Hf Antennas for All Locations

List Price: $ 20.00

Price: [wpramaprice asin=”1872309151″]

[wpramareviews asin=”1872309151″]
[wprebay kw=”hf+antenna” num=”0″ ebcat=”-1″] [wprebay kw=”hf+antenna” num=”1″ ebcat=”-1″]

Related HF Antenna Products

This was at the 2008 Ham-Com in Plano Texas. Located at the Tarheels booth.
Video Rating: 4 / 5

Check out these ARRL images:

Mount Mitchell

Image by digilink

Mount Mitchell

Image by digilink

Nighttime from the Blue Ridge Parkway

Image by digilink

This is my first attempt at doing this setup. Antenna is controlled by a Parallax Servo Controller and Hi-Tec Servos commanded by the Orbitron Satellite Tracking program as well as some software glue to make it all talk to each other. The only note I had myself was that the servos and mount could be improved but it does track accurately and it does work. This finishes 2 years of off/on work. Props to www.youtube.com Comments welcome
Video Rating: 5 / 5

This video describes how I am going to mount some of my HAM-Antennas.
Video Rating: 0 / 5

Dual Band 2M/440 Amateur Glass Mount Antenna

  • For Amateur & Ham Radio transceivers.
  • Operates 144-148Mhz & 430-450Mhz.
  • Handles 50W, Dualband.
  • 2M/440 VHF-UHF.

Dual Band 2M/440 Peel & Stick to Glass Amateur Radio Antenna.
50W, 144-148/430-450Mhz.
2 meter & 70cm. No drilling.

List Price: $ 46.98

Price: [wpramaprice asin=”B0041WYH2U”]

[wpramareviews asin=”B0041WYH2U”]

#1 Falcon 2 Meter Double Bazooka Base Station Ham Radio Antenna

  • 2 Meter Amateur Radio Antenna
  • Weather Tight Indoor Outdoor Design
  • Legal Limits of Power
  • House, Condo, Apartment, Garage, Mobile Home

#1 Falcon 2M Double Bazooka Radio Antenna,

This is an Indoor, Outdoor apartment, house, condo, attic or garage, 2 Meter Ham Radio Transmitting antenna.

It is made to be hung in the rafters or from the ceilings. Or outside on the roof, or between 2 trees or the side of a wall, or whatever you can imagine.

It will handle up to 1500 watts PEP and comes pretuned.

These can be mounted almost any where, and in any shape, horizontal, vertical, in a V or an L they work. Talk about a stealth base

List Price: $ 31.99

Price: [wpramaprice asin=”B003ACYLYQ”]

[wpramareviews asin=”B003ACYLYQ”]

Related Ham Antenna Products

A slightly modified 2 inch clamp makes an easy and handy antenna mount for ‘hamstick’ style antennas.

KEMET Offers HiQ-CBR Series Surface Mount Multilayer Ceramic Capacitors for
Typical applications include critical timing, tuning, bypass, coupling, feedback, filtering, impedance matching, and DC blocking. Field applications include wireless and cellular base stations, wireless LAN, subscriber-based wireless services,
Read more on Sacramento Bee

Myryad MT 100 FM stereo tuner
This is followed by a discrete class-A push-pull output buffer amplifier, which provides low output impedance and high drive capability. The MT 100 has eight separate power supplies. The signal-strength meter combines the signal-strength output from
Read more on Stereophile Magazine

U.S. Patents Awarded to Inventors in Oregon (Nov. 11)
11 — Electro Scientific Industries, Portland, Ore., has been assigned a patent (8054085) developed by Brian Johansen, Hillsboro, Ore., and Brandon John McCurry, Portland, Ore., for a "programmable gain trans-impedance amplifier overload recovery
Read more on Targeted News Service (subscription)