Posts

Showing FLDIGI in Linux, using Yaesu ft-847, Donner Interface cable, 20 meter psk31 short qso contact from California to Ukraine almost 6200 miles away from me. Using a 40m Horizontal delta loop, about 10 feet high. (131 feet long). Using a homebrew aircore Balun which is about 2.5 to 1. and about 70 watts of power. Thanks to the great videos by K7AGE on how to get started with PSK31.. I loved the simple microphone receive only video that he did…Nice!! Easily understood, easily duplicated and certainly made me want to work this mode and transmit too! I have had many contacts on 5 watts, normally I start low and work up..but in this case, to get a video in 1 shot, I cranked up to about 70 watts, however, it most likely wasn’t necessary to be that high…just an fyi I have been ‘cross the ocean on 10 watts many times when the bands are open. Yes, you can hear my cat in the background…I guess he thinks I am talking to him..LOL 73 from AG6IF
Video Rating: 5 / 5

How to program the Yaesu FT-60R 144/430 MHz 5-Watt FM Hand-held with a basic repeater.

MOV00664 29.620 FM RPT CA3SOC YAESU FT-847 Ham-Radio Repeater

Rob works his Yaesu FT 847 on field day

www.kcomm.biz This video shows how to install a NMO type antenna mount..It was mounted on a 2009 Ford F-150 pickup truck at Kcomm the ham radio store in San Antonio, Tx..I aquired my brother Tim KE5CFZ to help me.. The NMO mount requires a 3 hole which was drilled thru the roof just in front of the cargo light assembly..The coax was then run under the headliner, down under the inside trim, then under the kick panel to behind the drivers seat.. The coax was cut to length, pl-259 was soldered on & a Tram dual band antenna was screwed onto the NMO mount.. The antenna was tested with an analyzer & all SWR checks were good on VHF & UHF.. Thanks for watching..73s, Mel, WA5UTK,