This short video shows a very simple way to hook up an oscilloscope to use it as an RF Signal Monitor to observe the RF envelope from your ham radio transmit…
Video Rating: 5 / 5
This short video shows a very simple way to hook up an oscilloscope to use it as an RF Signal Monitor to observe the RF envelope from your ham radio transmit…
Video Rating: 5 / 5
Demonstration of audio processing with the Teensy 3.1 microcontroller board and audio shield to implement a Software Defined Radio. RF front end is a SoftRoc…
Video Rating: 5 / 5
A simple antenna that is easy to build and has good performance. Article: http://www.rchacker.com/diy/antenna-designs-for-rc/vee-antenna 4NEC2 and Github lin…
Video Rating: 4 / 5
uLog – Simple Ham Radio Logger
Southgate Amateur Radio Club uLog was unveiled at the recent CARS Amateur Radio Skills Workshop. Its 'flexi-input' was of particular interest, as you can type the QSO details into a single box, and the software intelligently works out in which fields to put the information. Find … |
A simple rotary dipole which covers from 80m to 6m. I have tested it on 40/30/20/17/15 and 6m and it works well. There are three important factors for good r…
This is a review of the Current and most used Digital modes in ham and SWL radio and the free software and simple setup to get you on them
Video Rating: 0 / 5
with the radio reset I will walk you thru simple bacis setup of you 710 to accept the Avmap g6APRS GPS, and explain the APRS tune feature.
Video Rating: 4 / 5
This video shows the Qtmm soundcard modem receiving local APRS traffic on 144.800 MHz. The Qtmm AFSK1200 soundcard modem is written by Alexandru Csete OZ9AEC and is available for Linux, Mac and Windows from sf.net More info about qtmm: www.oz9aec.net
Video Rating: 5 / 5
This is a little project that i have been thinking about building for awhile now, this is a VHF and UHF antenna tuner / matcher. This item well help you tune a random rubber duckie, outside antenna, or just a whip so your scanner well be able to RX better then it could before, depending on the coil used and just as many taps on it, you can fine tune a antenna perfectly to your scanner radio. I built this tuner and tested it on the bench with my Uniden Bearcat BC-796D 25-1300mhz scanning reciever.
Thoughts and Modifications of mine on the Vectronics VC-300M 300 Watt Mobile antenna tuner.
Video Rating: 5 / 5