Ham Radio Deluxe with CAT cable interface and audio cable to YAESU FT897D Heavy metal on BBC Radio 1.
Video Rating: 0 / 5
Ham Radio Deluxe with CAT cable interface and audio cable to YAESU FT897D on GB3SW FM repeater.
Video Rating: 0 / 5
Posts
Audio2000s Adc2117 5ft. RCA Audio Signal Cable
- The conductor is stranded with silver-plated PCOCC (Pure Copper by Ohno Continuous Casting process) copper wire for signal transmission fidelity.
- The conductor is coated with foamed PE for a insulation layer with low capacitance.
- A conductive PVC layer achieves a 100% shielding coverage which prevents both EMI and noises from mechanic vibration and twist.
- Highly pure oxygen-free copper (OFC) is braided as shield to achieve a shielding coverage greater than 95%.
- RCA plugs of highly pure copper enhances signal stability to achieve low VSWR (Voltage Standing Wave Ratio), less than 1.1 at 200MHz.
ADC2117 5Ft. 8mm RCA Audio Signal Cable
List Price: $ 8.99
Price: [wpramaprice asin=”B009I81PO0″]
[wpramareviews asin=”B009I81PO0″]
[wprebay kw=”standing+wave+ratio” num=”0″ ebcat=”-1″]
50ft RG8x Coax UHF (PL259) Male/Male 50 ohm Antenna Cable
- 50 Feet High Quality RG-8X Coax antenna cable
- (2) UHF PL-259 male plug
- Great as jumpers to an antenna tuner, switch, meter or your main antenna
- 50? Low-loss RG8x-mini
- Fully molded
RG-8X male to male jumper for ham radio and CB. 50ft shielded 50 ohm cable with molded-on PL-259 plugs on each end. All the connections inside are soldered and the cable is made of copper conductors.
List Price: $ 24.99
Price: [wpramaprice asin=”B004EFNHXE”]
[wpramareviews asin=”B004EFNHXE”]
Testing a lightweight HF magnetic loop antenna made from 7 metres of RG58 coaxial cable. Contacts were made on 40 and 20 metres during the Lighthouse Weekend. It uses just three main parts: the coax itself, an air-spaced variable capacitor (approx 50 – 100pF max) and a T50-43 ferrite toroid. The toroid is threaded over the coaxial cable. RF from the transceiver is fed via a 2 or 3 turn winding over the toroid (experiment with this for lowest SWR). The coax inner is left unconnected; only the braid is used here. The loop is for low power use only – it will take 10 – 20 watts before the variable capacitor arcs over. Performance is, as expected, somewhere between a smaller pedestrian mobile magnetic loop and a full sized wire antenna. It would be improved if the variable capacitor was a low loss type and the coaxial cable was soldered straight to it. While there’s enough information above to make your own, it’s worth checking out G4FON’s website ( www.g4fon.net ) for similar loops. My loop is closest to his Version 2.
Video Rating: 5 / 5
Audio 2000s Adc2119 Rca Subwoofer Cable with Nylon Sleeve (5 Feet)
- The conductor is stranded with silver-plated PCOCC (Pure Copper by Ohno Continuous Casting process) copper wire for signal transmission fidelity.
- The conductor is coated with foamed PE for a insulation layer with low capacitance.
- A conductive PVC layer achieves a 100% shielding coverage which prevents both EMI and noises from mechanic vibration and twist.
- Highly pure oxygen-free copper (OFC) is braided as shield to achieve a shielding coverage greater than 95%.
- RCA plugs of highly pure copper enhances signal stability to achieve low VSWR (Voltage Standing Wave Ratio), less than 1.1 at 200MHz.
ADC2119 5 Feet 8.5mm (OD) RCA Subwoofer Cable with Nylon Sleeve
List Price: $ 9.99
Price: [wpramaprice asin=”B009JIAW3Y”]
[wpramareviews asin=”B009JIAW3Y”]
Cablesson Ivuna RCA to Jack Cables – White/ Black which feature many of the advanced technologies found in higher performance cables, which features: higher quality gold tip connections, user-friendly features like color-coded connectors (Cablesson Logo) for easy, error-free hookup, plus increased power handling of speaker cables to deliver the full dynamic range of audio designed with stylish, futuristic gold plated connectors. Today’s home theater systems deliver high performance Audio (Surround Sound). While the connection between sources such as Blu-Ray and an AV receiver are digital, the connection to the speakers and sub woofers are analog. The high performance of today’s technology is wasted if the cable used interferes with the audio as it travels to our ears. Cablesson Ivuna RCA to Jack Cables delivers the dynamic range and power that make experiencing your audio the best that it can be, allowing you to hear all the audio nuances from a whisper to an explosion. Get the most from your home movie experience with Cablesson Ivuna RCA to Jack Cables.The Cablesson Ivuna RCA to Jack Y Audio Cable hooks up your portable audio player to portable speakers or an AV receiver with ease. Gold-plated connectors and contacts maximize conductivity while preventing corrosion using high-quality copper cable, aids signal consistency. Meanwhile, the shielded cable cuts down on electromagnetic and radio frequency interference. For more details visit us at www.ukhdmi.com and http
Check out these Ham Antenna images:
Beam Cable Replacement
Image by Paul L McCord Jr
Beam Cable Replacement
Image by Paul L McCord Jr
Video Rating: 0 / 5
Video Rating: 0 / 5
US Made 6 ft ASUS D-Link Netgear Wireless Router WiFi Antenna Extension Cable – Times Microwave LMR-240 Coaxial Cable Antenna Coax wire with RP-SMA Male & RPSMA Female Connectors for Extending External Antennas lmr240
- US Made LMR-240 is more flexible than Times Microwave Systems LMR-400 Coax
- RP-SMA Male & RPSMA Female coax cable connectors – Connects Most Wireless Routers including Asus, Dlink & Netgear Routers, Antennas, external to wifi routers to boost signals
- 6 feet of coaxial cable USA Made & Assembled Times Microwave LMR-240 Transmission Line Coaxial Cable with High Quality RP-SMA Male & RPSMA Female connectors to extend and connect antennas
- Ultra low loss characteristics ensure the maximum performance of your Wireless Antenna installation
- Impedance 50 Ohms Frequency Range DC ~ 6 GHz – RP-SMA Male & RPSMA Female Antenna Cables are designed for 2.4GHZ 802.11 Wireless Internet use
MADE IN THE USA – This Genuine Times Microwave USA Made LMR-240 coaxial cable was developed to provide an extremely low loss alternative with the transmission characteristics of hardline coaxial cables and the flexibility required for WiFi, Ham and CB Radio installations. Times Microwave systems, designs and manufactures high performance coaxial cables, connectors and cable assemblies for a broad range of RF transmission applications. For more than 50 years, Times has been the leader in the deve
List Price: $ 24.99
Price: [wpramaprice asin=”B005S4D21W”]
[wpramareviews asin=”B005S4D21W”]
Astatic Heavy Duty Antenna Lip Edge Antenna Mount – Angle Adjustable w/ Cable assembly
- Multi Adjustable any direction, Fits any Angle lip / Metal Edge!
- For Trunks, side hatches, hoods, doors, & other metal lip edges.
- Complete wirh 16.5ft cable assembly w/PL-259 on Radio end. No Drilling.
- For Antennas w/ 3-8/24 thread.
- Great For HF Antennas, CB & Ham Radio antennas.
Heavy Duty Lip Edge Mount For 3-8/24 Thread Ham Amateur & CB Antennas!
Can Bet set for Antenna in vertical position regardless of installed lip angle.
Complete wirh 16.5ft cable assembly & PL-259 connector on radio end of cable.
List Price: $ 49.98
Price: [wpramaprice asin=”B0041WPXKA”]
[wpramareviews asin=”B0041WPXKA”]
Hf Antennas for All Locations
List Price: $ 20.00
Price: [wpramaprice asin=”1872309151″]
[wpramareviews asin=”1872309151″]
[wprebay kw=”hf+antenna” num=”0″ ebcat=”-1″] [wprebay kw=”hf+antenna” num=”1″ ebcat=”-1″]
Related HF Antenna Products
CablesToBuy™ N Female to RP-TNC Wireless Antenna Adapter Cable
- 2 feet of cable USA Made LMR-400
- Antenna cable – Connects Access Points, Routers and Radio transmitters to Antenna
- Impedance 50 Ohms Frequency Range DC ~ 11 GHz
- LMR400/LMR-400 is a Registered Trademark of Times Microwave USA
- Ultra low loss characteristics ensure the maximum performance of your external antenna installation
Conversion adapter cable for Wireless Devices with RP-SMA antenna connectors. Also works with Belkin, Compaq, D-Link, Intel, Netgear, Linksys and Siemens wireless networking devices.
Features:
Converts RP-SMA type connector to N Female connector.
Low loss at 2.4 GHz frequency range.
Optimized for use with networking devices and wireless antennas.
List Price: $ 89.55
Price: [wpramaprice asin=”B000KMU0K8″]
[wpramareviews asin=”B000KMU0K8″]
[wprebay kw=”antenna+impedance” num=”0″ ebcat=”-1″] [wprebay kw=”antenna+impedance” num=”1″ ebcat=”-1″]
Find More Antenna Impedance Products
Ham Radio eBay auctions you should keep an eye on:
[wprebay kw=”ham+radio” num=”10″ ebcat=”-1″]
[wprebay kw=”ham+radio” num=”11″ ebcat=”-1″]
[wprebay kw=”ham+radio” num=”12″ ebcat=”-1″]