Check out these Ham Radio images:
QRPSWR_box_outside.JPG
Image by Jim at sonicchicken
External work is finished, except for labeling. I am pretty happy with the appearance of this project!
QRPSWR_box_inside.JPG
Image by Jim at sonicchicken
Test-fitting all the external components. A slightly larger box would have been *much* easier, although this was a very enjoyable challenge!
QRPSWR_box.JPG
Image by Jim at sonicchicken
Metalwork is done on the project box! Still need to cut down the shafts on the pot. and rotary switch.
Leave a Reply
Want to join the discussion?Feel free to contribute!