DIY video for ARRL

DIY video for ARRL

Video Rating: 5 / 5

2008 ARRL 10 GHZ Contest – Ham Radio contacts on 10 GHZ.

/16 Comments/by
You might also like
Cool ARRL images
2010 ARRL 10 Meter Contest
ARRL in Action: What Have We Been Up to Lately?
The ARRL Handbook for Radio Communications 2013 Hardcover
ARRL Letter Temporarily Suspended
ARRL EME CONTEST FROM JAMESBURG DISH WORKING G4CCH
ve2crs ARRL Field Day 2012
Cool ARRL images
16 replies
  2. combatwombat71
    combatwombat71 says:

    Just got my Kuhne kit for 10GHz up and running. Next step is definitely a
    PLL 106.5MHz oscillator… the kit drifts bad due to all the multiplication
    to 10224 from 106.5. Other than that, it works well. 73 – Rob VK2GOM

    Reply
  3. David M
    David M says:

    This is very nice. I have thought of this type of operation. I got tired of
    “5/9 QRZ”, then I went to building QRP rigs, then I got transferred. My
    radios have sat in storage for the past three years. This video is great.
    Thank you.

    Reply
  4. EdWatts
    EdWatts says:

    I just got some old equipment which was used as a high-speed internet link
    via satellite. The system operates on 10 GHz, although I am not sure of the
    exact frequency just yet. It’s all commercial and very high-quality;
    looking at the heat sinking, I am guessing that the output is on the order
    of ten watts or so, which is pretty high power for amateur radio on ten
    gigs. The gear is at my ex-wife’s house, but I’m pretty excited about
    getting it home to my shop and checking things out. KI6DCB

    Reply
  6. combatwombat71
    combatwombat71 says:

    @bandopening Thanks for your reply. I am now using a Trimble GPS
    disciplined oscillator at 10MHz that is fed to a home-brew synthesizer to
    generate 106.5MHz which is fed into the Kuhne transverter. Works great, and
    very stable. The only drift now is the FT290R IF rig. 73 – Rob VK2GOM

    Reply
  9. kd1s
    kd1s says:

    Pretty cool! 10GHz would be kind of useless around here. The multipath
    would be AWFUL because we’ve got a lot of reflective surfaces.

    Reply
  12. Craigoss123
    Craigoss123 says:

    An interesting video. I have never ventured above UHF despite having a
    licence since 1991. Maybe Its time to have a go. 73 Craig G7KJG

    Reply
  15. Ron Jones
    Ron Jones says:

    I have changed my VFO to a system that uses a N5ACX “Apollo synthesizer. I
    used a rubidium 10 MHz oscillator or an ovenized 10 MHz oscillator as the
    reference and the Apollo synthesizer produces the required local oscillator
    for the transverter. Overnight I went from unstable, wandering to dead on
    frequency to within a hertz at 10 GHz! Why…. because I could!! The
    rubidium is an overkill, but it only cost about $70. It works sooooo well.
    Google N5AC for more info. 73 Ron K7RJ

    Reply
  16. Robb Kunz
    Robb Kunz says:

    I use mostly all Kuhne Electronics stuff, it’s more expensive but much
    higher quality which helps a lot at these higher frequencies e.g.
    stability. I have their 10GHZ and 24GHZ transverters, 24 GHZ beacon, and
    external Oscillator w/10GHZ external reference for 24GHZ. I drive this
    using an Icom-706 MKIIG feeding a 17dbi Horn into an old Satellite TV Dish.
    73 – Robb – N0KGM

    Reply

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.