RTL-SDR decode GSM – E-GSM

Decode GSM with RTL-SDR.
Video Rating: 5 / 5

Using the RTL2832U with SDR-radio.com V.2

The V.2 version of SDR-radio.com now supports the RTL-2832U DVB-T sticks for SDR reception using TCP. To set up SDR-radio.com V.2 for a RTL-2832U you will ne…

/22 Comments/by
You might also like
RTL USB + SDR # = WIN, / Newsky TV28T v2 USB DVB-T & RTL-SDR Receiver, RTL2832U & R820T Tuner
How to decode digital voice with RTL SDR
Analyzing Cellular GSM with RTL-SDR (RTL2832), Airprobe and Wireshark
Decode Pager Traffic with RTL SDR, PDW and SDR#
RTL-SDR RTL2832U & R820T singal noise.
Latest RTL-SDR News
RTL-SDR + SDR# in direct sampling mode and MixW32 decoding RTTY on 147 kHz
RTL-SDR, 433MHz Funksteckdosen und BNC Mod
22 replies
  3. JohnnyX50
    JohnnyX50 says:

    just got mine to work, im really impressed with the 2MHz bandscope!! I have
    the compro videomate U650F and have it hooked up to a linear rod antenna,
    picking up tons of local fm stations , taxi data, pagers, and air
    data/voice !! i can see the DAB data higher up but need the dedicated DAB
    SDR to decode it as this SDR doesnt have that feature..yet 😉

    Reply
  4. Kraghot
    Kraghot says:

    no problem man. Try right click on the application, properties and under
    compatibility tab select run as administrator

    Reply
  5. Marcelo Xavier Vieira
    Marcelo Xavier Vieira says:

    I have the same problem reported by user janjacobs66. I followed all of the
    instructions but my device is not listed. I run the file rtl_tcp and it
    finds my device (R820T). It’s strange, because I am able to tune it using
    SDR# and HDSDR, which means the driver (Zadig) is correctly installed. I
    tried installing version 2 and version 2 beta, but I still have the same
    problem. Nothing works…

    Reply
  6. MauriatOttolink
    MauriatOttolink says:

    Thank you Kraghot. Must now go off in search of how to do that! Thought
    that I WAS administrator! XP Pro. service pack 3. Good luck and thank you.

    Reply
  7. Ray Lyford
    Ray Lyford says:

    I quite like the layout of this software. It seems to work very well on my
    RTL with 820T. The sound was a little perplexing but once i found the right
    button it was plain sailing. I think as a preview it’s very good . I used
    the Alternate setup mentioned above, this worked first time for me.I cant
    wait to see where this is heading. Great Job.

    Reply
  9. Philip Giacalone
    Philip Giacalone says:

    Great, thanks 🙂 More requests… Could you do a video on installing zadig
    on Windows? Some troubleshooting advice would also be helpful if it doesn’t
    work. Some explanation about what zadig is, what it does, and why it’s
    needed would be helpful. Are improvements or better alternatives on the
    horizon, etc.

    Reply
  10. MauriatOttolink
    MauriatOttolink says:

    Thank YOU! It’s great to encounter a real expert who can explain and not a
    know all who doesn’t know anything and CAN’T explain. Made my day..

    Reply
  12. Philip Giacalone
    Philip Giacalone says:

    I really love your videos. They’re very well produced and are at the
    cutting edge of this quickly advancing technology. One small comment —
    that is meant to be constructive. It would be nice if there was some
    narration along with the on-screen text during the silent portions of the
    video demos. In any event. Keep up the great work!

    Reply
  15. A Ebel
    A Ebel says:

    It looks too complicated to setup. I hope that the next releases offers
    full support for RTL-SDR’s. Thanks for the demonstration anyways.

    Reply
  17. cheen2010
    cheen2010 says:

    I’m having some troubles getting this started. Does this work as easily on
    windows? I’m doing a school project on SDRs and if I could get some more
    help on getting this running that would be great.

    Reply
  20. cheen2010
    cheen2010 says:

    I’m trying it on windows 7. Followed all of the steps and still seems to
    not be working. All of the numbers are right and everything. And I
    downloaded all 3 files from the links you posted.

    Reply
  21. Dougie Ryalls
    Dougie Ryalls says:

    I remember when I was setting up cb radios and power amps when I was 13 and
    all the fun of the project was the setup

    Reply

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.