Easy External Scanner Antenna for Police, Fire, EMS

Easy External Scanner Antenna for Police, Fire, EMS.

18 replies
  1. M1PRO
    M1PRO says:

    I personally recommend you hose clamp the antenna at the bottom end on the
    end cap get the antenna above the the main mast as you are shielding the
    antenna into one direction. Also you soldered the coax is not the best you
    would of been better off soldering connectors on as there are losses not
    doing it this way. But nice ideal

    Reply
  2. drez20001
    drez20001 says:

    Sorry for not getting back to you – sometimes life just gets crazy busy…
    It picks up “pretty well.” I can hear stations 20 to 30 miles away with it.
    It’s not the best solution, but a workable one if the parts are at hand.
    It’s pretty low profile too and if painted to match the house or trees
    could blend in well.

    Reply
  3. drez20001
    drez20001 says:

    Thanks for taking a look and commenting. A discone will certainly work
    better – I’ve thought about putting one up too.

    Reply
  4. drez20001
    drez20001 says:

    Not sure what the actual gain is but it performs a little better than a
    hand held antenna. A jpole or other similar antenna will certainly work
    better but this might be a good antenna to kind of hide if necessary.
    Thanks for taking a look.

    Reply
  5. Guntrician
    Guntrician says:

    Well done. Not knocking your project but have to comment for those out
    there looking for more than a “little” improvement in reception, one of the
    commercial scanner antenna options work very well. It won’t be as cheap of
    course but I spent around $35 on a discone antenna and noticed a
    substantial improvement. But, if money is tight, nothing wrong with the DIY
    route and it will be an improvement over an antenna that is indoors. Thanks
    for posting the vid. Again, well done! 🙂

    Reply
  6. fieldho
    fieldho says:

    Hello, thanks for the video. I know this is an old video so, two years
    later, did you ever have guests who didn’t know or forgot how close the
    mount was to the chimney and built a nice, warm, raging fire. Hope all is
    well.

    Reply
  7. Poochie43124312
    Poochie43124312 says:

    being so close to the flue cap it might crack the pvc quicker than normal
    or build up pressure and cause a cap to fail. please let us know what
    happens later , its still a cool idea. 

    Reply

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply to Bkeytx Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.