The MFJ-941E is designed to match virtually any transmitter to antenna, including dipoles, inverted vees, verticals, mobile whips, beams, radom wires, and others fed by coax lines, balanced lines or a single wire. An eight-position antenna-selector switch provides versatile antenna selection. The MFJ-941D will handle up to 300 watts of transmitter RF output power. The MFJ-941 employs a cross-needle meter so forward power, reflected power and SWR may be read simultaneously. This tuner is in “MINT” condition. The tuner is very clean both inside and outside it’s cabinet. The cabinet has be taken down to bare metal and repainted with RUST-OLEUM “Hammered” finish. All of the position “dent” switches have been sprayed with DeoxIT D5. This spray is very popular and rejuvenates, lubricates and protects electronics. DeoxIT states more than a Contact Cleaner and chemically improves electronic connections. All of the tuner’s components have been tighten and re soldered (as to need) to restore as of just leaving the factory. The tuner shows no appearance of any burnt conditions from any type of arcing either RF output or lightning. The meter lamp can be powered by a 12 Vdc source. Use a 2.1 coaxial plug with the center conductor of the plug connected to the positive and the sleeve connected to ground. Please note: This cable and plug has been constructed and will come with the tuner. The Meter Lamp ON/OFF switch will activate the meter lamp. The MFJ-941E utilizes a cross-needle meter …
Video Rating: 5 / 5
Great little tuner! I have the older 941 tuner with the single needled meter.