The amateur bands are filling up with very dirty data modes transmissions, we are seeing single PSK and JT65 transmissions taking out the entire modes’ sub-bands in some instances and this is entirely avoidable, not to mention completely unacceptable.

This video is an addendum to my previous video regarding the setting up PowerSDR for data-modes (digi-modes) because there are some settings in Windows which can significantly contribute to IMD on TX.

We take a walk-through of VAC’s (Virtual Audio Cable) Windows driver back-end which defaults settings to 44.1kHz potentially adding unwanted sample rate conversions which can introduce further IMD, then look at how to have Windows reduce audio drive, cleaning up the outgoing AFSK.

The motto of the video is, ensure your ALC compression is zero and that the ALC is in negative figures of between -0.5 to -1.0 dB (legacy radios = NO ALC deflection at all) to guarantee minimum IMD resulting from audio drive levels. Depending on the mode, you may want to drive at even lower levels.
Video Rating: 4 / 5

7 replies
  1. W1AEX
    W1AEX says:

    Nicely done Nige. The windows audio subsystem is quite devious and you have
    done a nice walk-through of how to tame it. 73, Rob W1AEX

    Reply
  2. Conrad Farlow
    Conrad Farlow says:

    Nigel thanks ever so much for this, it’s very informative. In fact the
    whole series is so useful it should be mandatory!

    Reply

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply to Norbert Göttsche Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.